Railroad

NOTICE - IMPORTANT INFORMATION

Due to new switching devices being installed by many of the major Railroad Companies - Rail Shunting may or may not work and may cause additional problems and should only be used as a last resort. SEE NOTE BELOW.

We would recommend that the follow procedure be taken in the event of a "High-Centering" of an over-dimensional load on a rail grade crossing.

In the event of an over-dimensional load high-centering on a railroad grade crossing, take the following steps immediately:

1. Get all personnel out of the vehicles and away from the crossing.

2. Locate the rail-grade crossing identification sign with identification number.

3. Call the 1-800 number listed on the identification sign.

4. If a railroad identification sign cannot be located - call 911.

5. Send the Pilot/Escort Vehicles in each direction away from the crossing to place a red burning fuses/flare or red illuminating devices in the middle of the railroad tracks a minimum of 1 mile away from the crossing.

6. Shunt each and every set of tracks - if this is not done correctly, you may be sending the wrong signal to an on-coming train. If you do not know how to do this - DON"T

AMTRAK 800-331-0008

BNSF Railway 800-832-5452

CSX 800-232-0144

Norfolk Southern 800-453-2530

Kansas City Southern 877-527-9464 or 800-892-6295

Canadian National 800-465-9239

Canadian Pacific 800-716-9132

Union Pacific 800-877-7267

Notice:
RSA Network Inc. currently holds the copyrights to all training materials utilized within these presented courses. The manuals and documents inlcuding by not limited to the PowerPoint Presentations, Video and Audio inlcuding on-line renewal documents and electronic media are registered with the Library of Congress and have been updated in 2009. Any use of these materials by any party other than RSA constitutes an enfringement of these rights and is expressly prohibited without prior written consent. Copyrights are valid for the life of the author plus 75 years and will be enforced.